Device for Rescue and Self Evacuation
RINNO
Codes
USAE00000060 – 60m
USAE00000090 – 90m
USAE00000120 – 120m
USAE00000140 – 140m
Complies with standards:
• EN341:2011;
• ANSI/ASSE Z359.4:2013
Material
Body and cover: Aluminum
Rope grab: Aluminum
Connectors: Three (3) connectors, Triple Lock in steel, class B;
Weight: 3.1kg (device);
Semi-static Rope: Kernmantle 9.5mm;
Wheel: High-performance polymer.
Usage
The RINNO device was developed for evacuation and rescues in vertical activities, and can be used in:
• Wind turbines
• Telecommunications towers
• Aerial lifting means
• Offshore oil platforms
• Cranes
• Industrial buildings, etc.
IMPORTANT
Any and all modifications, alterations or repairs without the manufacturer's consent are strictly prohibited, resulting in the cancellation of the Warranty and exemption of the Company's responsibility over the product.
USAGE
Rescue and self-evacuation in emergencies during work at heights. Ideal for use on poles, transmission towers, wind turbines, and various other situations.
WARNING
This equipment must only be used by qualified and trained professionals.
Lack of training, reading, and perfect understanding of the information described in this manual may lead to serious and/or fatal accidents.
RESPONSIBILITY
It is the responsibility of the users of this equipment for any type of accident or incident caused by incorrect, improper, or unauthorized use by the manufacturer.
STORAGE AND CLEANING
The system should be stored inside its bag in a dry location, protected from UV radiation when not in use, away from chemicals, in ventilated areas, and at temperatures not exceeding 50°C.
VALIDITY
Indeterminate.
SERVICE LIFE
The service life of the equipment cannot be expressed in exact numbers, as it depends on external influences, as well as the type of application, intensity, and frequency of use.
WARRANTY
This product is guaranteed against any manufacturing defects.
The following are excluded from this warranty:
• Normal wear and tear;
• Modifications;
• Poor storage and misuse;
• Lack of maintenance;
• Uses for which this product was not designed;
• Rust due to: salinity, storing with equipment still damp or wet;
• General negligence.
INSPECTION
The equipment must be sent for inspection when reaching the following conditions:
• When reaching a total of 15 descents performed, not exceeding 500 meters;
• When reaching 500 meters in descents not exceeding a total of 15 operations;
• After descent with 2 users not exceeding 280 kg.
MAINTENANCE
This product follows the Warranty Policy that accompanies the product. In case of doubt or loss of the Warranty tag, contact us through the website www.ultrasafe.com.br. If you wish to activate the warranty against manufacturing defects or maintenance of your equipment, contact sac@ultrasafe.com.br.
RINNO
The equipment is constructed with a machined aluminum body, including a braking and directional system also made of aluminum.
To facilitate lifting, the device is equipped with a nylon wheel.
The rope clamps, made of anodized aluminum, are integrated into the housing, ensuring durability and effectiveness.
The top anchorage point of the equipment is made of stainless steel.
Semi-static polyamide rope, 9.5 mm – 22 kN (The rope that accompanies the equipment will have its length defined according to the specified code, with options of 60, 90, 120, and 140 meters.).
ACCESSORIES
• 01 anchoring strap of 1.20m - 22 kN;
• 3 carabiners made of steel with a triple locking system;
• Waterproof canvas bag for accommodation and transport.
USAGE INFORMATION
For use, it is important to always pay attention to the Usage Specification Table below.
USAGE SPECIFICATION TABLE
Load (kg) Users Number of descents Total
50 to 140 1 15 500m
Up to 280 2 1 200m
The maximum permitted elevation with a load of up to 280kg is 1.5 m.
USAGE MODE
STEP 1
Guide the excess rope through the ear towards the rope's slack.
STEP 2
Secure the rope by passing it through the internal part of the clamp.
STEP 3
Start rotating the wheel until the victim's fall arrest device loses tension and can be removed.
During the wheel's rotation to lift the victim, slack will be generated.
This slack should be removed by pulling the rope held in the clamp downward, without removing it from inside the clamp.
STEP 4
CONTROLLED DESCENT
For a controlled descent, the rescuer must remove the rope from the clamp while keeping it in the ear and release the rope in a controlled manner.
STEP 5 DESCENT WITHOUT RESCUER INTERVENTION
To facilitate the victim's descent without the rescuer releasing the rope, the rope must be freed from the clamp.
After removing the rope from the equipment's ear, begin the descent.
STEP 6
SELF-EVACUATION
For self-evacuation, the user must guide the excess rope through the ear towards the rope's slack.
Secure the rope in the clamp, attach the end of the RINNO carabiner to the harness's anchor point, and position oneself at the movement point.
Once positioned, remove the rope from the clamp and ear, thus beginning the descent.
Discover similar products
